The "Passport"
+6
DIRTY
piratex
MudRaider
Lock~N~Low
Nick@HappyTrails4x4
4x4troy
10 posters
Page 4 of 5
Page 4 of 5 • 1, 2, 3, 4, 5
Re: The "Passport"
i do plan on terra-low 4:1 tcase gears and i doubt i go any bigger then 38's...it will probably end up with 35's.
Re: The "Passport"
oh and here is a rodeo with a 14 and 44 fw on yj springs in front and stock rodeos in rear(just a soa)
- Attachments
Re: The "Passport"
That looks pretty good. At least now I can visualize it bigger. Still....Honda? Gonna be pretty good seeing a Honda badge on the trail. Definitely not something you'd expect to see with some big knobby tires under it.
Re: The "Passport"
How long before you get it rolling
Lil Pepè- Moderator
- Posts : 333
Join date : 2011-11-01
Age : 54
Re: The "Passport"
Are u putting the 60 and 80 under it?
89WhiteXJ- senior member
- Posts : 873
Join date : 2011-06-23
Age : 40
Location : Oceanway
Re: The "Passport"
Ok. You should be able to sell them easy. I was only asking b/c only 35s on a 60 and 80 is just way too much axle. I was going to say sell them and buy something smaller, but that was ur plan anyway. So, nevermind.
89WhiteXJ- senior member
- Posts : 873
Join date : 2011-06-23
Age : 40
Location : Oceanway
Re: The "Passport"
if it does stay with the 60/80 then it will get bigger meats...really dont want biger then 35 but i will go up to 42
Re: The "Passport"
Aw man a honda on 42's!! I think it would be the first of its kind. I say go with 42's
piratex- Hardcore member
- Posts : 849
Join date : 2011-11-15
Age : 33
Location : riverside
Re: The "Passport"
Yea they are. I bet dirtys 37's cost him an arm and a leg. I can't imagine what 42's with cost especially like a bogger or pitbull
piratex- Hardcore member
- Posts : 849
Join date : 2011-11-15
Age : 33
Location : riverside
Re: The "Passport"
i think 35's would be a good starting point
Nick@HappyTrails4x4- Hardcore member
- Posts : 511
Join date : 2011-06-24
Re: The "Passport"
thats what i want but if i use the 80...its a big low hangin axle...gonna need some tall meats to have decent clearence under the pumpkin.
Re: The "Passport"
i just traded some 44 waggies but i got another set if you are interested 300. pass drop or you can buy my j10 axles already to go 488 gears auburn pro locker 44 front and the rear is a semifloat 14 bolt 488 auburn pro locker everthing new 1 ride on them my loss anyones gain 2000 + in them all brackets have been moved up so nothing dragin just axle tube
DIRTY- Vendor
- Posts : 839
Join date : 2011-08-22
Age : 48
Location : Right here
Re: The "Passport"
4x4troy wrote:thats what i want but if i use the 80...its a big low hangin axle...gonna need some tall meats to have decent clearence under the pumpkin.
shave it
Nick@HappyTrails4x4- Hardcore member
- Posts : 511
Join date : 2011-06-24
Re: The "Passport"
4x4troy wrote:yeah thats the best idea yet.....35's and a shave...i like it
Run it like that for a while, then get some bigger meats for it. Baby steps. We can't get them the way we want the first time in a week. Takes time. It'll get done.
Re: The "Passport"
Good thing I reminded you.
89WhiteXJ- senior member
- Posts : 873
Join date : 2011-06-23
Age : 40
Location : Oceanway
Re: The "Passport"
Does your port have a loCker?
piratex- Hardcore member
- Posts : 849
Join date : 2011-11-15
Age : 33
Location : riverside
Re: The "Passport"
4x4troy wrote:getting dirtys d44's f/r this week. then going under the passport
It's been 28 minutes, are they there yet? You'rer ready to go with this weekends festivities now, Right?
Re: The "Passport"
it has a limited slip now it the d44 thats in it. the axles i will be getting needs to be gone through and geared before going on the port
Page 4 of 5 • 1, 2, 3, 4, 5
Page 4 of 5
Permissions in this forum:
You cannot reply to topics in this forum
|
|
6/23/2015, 10:58 pm by OffRoadney
» 1989 Cherokee
6/23/2015, 10:47 pm by OffRoadney
» Submarine Cherokee
6/23/2015, 10:46 pm by OffRoadney
» Evening fun in the mud
6/23/2015, 10:40 pm by OffRoadney
» finally jumped my bronco
6/23/2015, 10:37 pm by OffRoadney
» kia vs b2
6/23/2015, 10:31 pm by OffRoadney
» shop truck
6/13/2014, 2:34 am by 4x4troy
» pickettville
4/27/2014, 3:06 pm by 4x4troy
» our rigs
4/27/2014, 1:17 pm by 4x4troy